5GHz Outdoor Long Range Wireless Bridge 5km Wireless Ethernet
LinkAV M5-20 is a high performance, high stability 5GHz wireless
network bridge. Integrates advanced 802.11n wireless kernel and
high gain dual polarized directional antennas. Powerful system
operation function and wireless communication optimization ability,
backward compatible with 802.11a standard.
|Product / Recommended distance||PTMP mode||PTP mode||PTP mode (full load)|
|LinkAV M5-20||5 km||5 km||2km|
|Frequency||Gain||Antenna Polarization Mode||Cross - Polarization Isolation||Maximum Standing Wave Ratio||Horizontal Polarization Lobe Angle||Vertical Polarized Lobe Angle||Longitudinal Lobe Angle|
|5.1 - 5.9 GHz||20dBi||Vertical/Horizontal Dual Polarized||27dBi||<1.8||16°||16°||16°|
Wireless Ethernet BridgeSpecification:
|WLAN Standard||IEEE 802.11 b/g/n, iPoll|
|Transmission Mode||MIMO 2x2|
|Wireless Frequency||5.150 - 5.850 GHz (FCC 5.745 - 5.825 GHz)|
|Transmission Power||Up to 29 dBm|
|Receiving Sensitivity||-97 ~ -75 dBm|
|Channel Bandwidth||5,10,20,40 MHz|
|Modulation Mode||802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)|
|802.11 b: DSS (CCK, DQPSK, DBPSK)|
|Data Rate||802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps|
|802.11 g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps|
|802.11 b: 11, 5.5, 2, 1 Mbps|
|Error Correcting Mode||FEC, BEC Selective Repeat ARQ|
|Duplex Mode||Time Division duplex|
|Types||Integration Dual-Polarized Directional Plate Antenna|
|Interface||10/100 Base-T, RJ45|
|Wireless Mode||Access point (automatic WDS), access point (iPoll), workstation
(WDS, iPoll), workstation (ARP NAT)|
|Wireless Function||IPoll (intelligent dynamic polling protocol), automatic channel
selection, automatic modulation mode selection, automatic transmit
power control (ATPC)|
|Wireless Security||WPA / WPA2 Personal Encryption, WPA / WPA2 Enterprise Encryption,
WACL, User Quarantine|
|Wireless QoS||IPoll implementation 4 queue priority|
|Network Mode||Bridging, IPv4 routing, and IPv6 routing|
|Network Technology||No NAT route, NAT route, VLAN|
|WAN protocol||Static IP, DHCP client side, PPPoE client side|
|Service||DHCP, SNMP, NTP client side, route tracing,watchdog|
|Management||HTTP(S) GUI, SSH, SNMP read, WNMS, Telnet|
|Tool||Site survey, connection test, antenna calibration|
|Size||205 mm (length) × 205 mm (width) × 45 mm (height)|
|Installation||Wall bracket / steel pipe bracket|
|Power||12 - 24V DC Passive PoE (24V Passive PoE Adapter)|
|Power supply||100 – 240V AC|
|Power Consumption||4.5 W|
|Temperature||-40°C ~ +65°C|
|Humidity||0 to 90% (non-condensing)|
|System monitoring||SNMP v1 / 2c / 3 services, system logs, alerts via Email and SNMP|
|Certification||Complies with FCC / IC / CE standards|
IPoll (intelligent dynamic polling protocol) has a strong
anti-interference ability even in areas with serious
interference,can still guarantee 64 users stable access to base
station. Equipped with dual firmware images,during the remote
software upgrade,the device can restart even if the power is
interrupted or upgrade fails.The solid enclosure is made of
polycarbonate plastic contains an ultraviolet inhibitor, which
ensures that the enclosure is exposed to outdoor sunlight for long
periods without cracking, a grounding lug and POE power supply for
installation to prevent lightning strikes.
IP65 level,Vibration, temperature and humidity, salt spray and
surge impact are in compliance with industry standard. The
excellent reliability is on the leading level in the field.
Wireless Network Bridge
Q1: Wireless bridge is Stable?support lightning protection or not?
A: The product of LinkAV,wireless bridge adopt USA Atheros CREE
XLamp,it is very stability.And according to customer requirment we
can provide a suitable solution for the customer,to achieve the
best effect.The device no lightning protection,if it is a
minefield, then do professional mine deal,if not, just need to do
the device contact with grounded.
Q2: How to install the wireless equipment?
A: It is very easy to install the wireless equipment,the customer
just need contact the device hardware,because the SUNTOR's
Technical personnel debugging good the device befor shipment.just
like you buy a new TV,only need to contact the line and pass on
Q3: How is the wireless bridge power supply?
A: The equipment can use solar power.many projects using solar
scenery complementary power supply,such as forest fire
prevention,water reservoirs ,ect.
Q4: Without network,the wireless bridge can transmit ?
A: The wireless bridge can transmit without network.Line of sight
between the monitory point and monitoring center, the equipment can
transmit by microwave.
Q5: Wireless equipment application?
A: Wireless equipment suitable for long distance transmission and
no need wiring,can use in builders, mariculture, across the river
across the road environment, residential elevators, reservoirs,
parks, forest fire, mountains, fields, roads, tunnels, scenic,ect.